Skip to content

Latest commit

 

History

History
163 lines (119 loc) · 6.99 KB

README.md

File metadata and controls

163 lines (119 loc) · 6.99 KB

screenstub

An alternative approach to a software KVM switch for GPU passthrough that aims to appear much like LookingGlass but without relaying frames.

screenstub uses DDC/CI to switch monitor inputs when its window is visible and/or in focus. It is intended to be used in fullscreen with virtual workspaces, and switches to the VM input when its workspace is visible. Many options are available for working with input forwarding to a VM, and if used without DDC/CI it becomes similar to something like Synergy.

Setup Overview

  1. Install screenstub via cargo.
  2. Run screenstub detect to check that DDC/CI is working and your monitor is detected. You may need to enable DDC/CI in your monitor's settings, and/or load the i2c drivers.
  3. Configure screenstub by modifying the example as necessary, and setting up the QEMU sockets.

Additional configuration may be required for advanced usage:

  1. Install and set up qemu-ga to run on Windows startup.
  2. Install a command-line DDC/CI program in Windows.
  3. Configure permissions, and check your input devices in order to use the advanced routing modes.

Installation

Requires a modern stable Rust toolchain, and can be installed and run like so:

cargo install --force --git https://github.com/arcnmx/screenstub
screenstub -c config.yml x

Dependencies

  • udev (Debian: libudev-dev)
  • libxcb (Debian: libxcb1-dev libxcb-dpms0-dev libxcb-xtest0-dev libxcb-xkb-dev)
  • python (build-time only to generate xcb bindings)

Packages

  • Nix{,OS}: nix run -f https://github.com/nix-community/NUR/archive/master.tar.gz repos.arc.packages.screenstub -c screenstub

Configuration

An example configuration is available to use as a starting point. There are a few specific items that need to be set up for everything to work. The screenstub detect command can be used to find information about DDC/CI capable monitors and their inputs.

QEMU Control Sockets

screenstub requires both QMP and guest agent sockets available to properly control the VM and QEMU itself. This requires something similar to the following command-line flags to be passed to QEMU (note libvirt may already expose some of these for you):

qemu-system-x86_64 \
  -chardev socket,path=/tmp/vfio-qga,server,nowait,id=qga0 \
  -device virtserialport,chardev=qga0,name=org.qemu.guest_agent.0 \
  -chardev socket,path=/tmp/vfio-qmp,server,nowait,id=qmp0 \
  -mon chardev=qmp0,id=qmp,mode=control

Guest Input Devices

screenstub emulates three different input devices: a keyboard, a tablet for absolute coordinate mouse mapping, and a mouse for relative motion events. Each of these devices may be configured as USB devices, PS/2, or virtio. It is recommended that you remove all existing input devices from your QEMU command line configuration (-usbdevice kbd, -usbdevice mouse, -usbdevice tablet, -device usb-kbd, -device usb-mouse, -device usb-tablet).

The default configuration sets them up for optimal compatibility, but virtio input drivers (vioinput) are recommended instead for performance reasons. These require drivers to be installed in the guest. You can download them for Windows here.

Input Event Routing

The routing mode describes how input events are translated from the host mouse and keyboard to the guest devices. The default qmp routing mode sends all input commands over the QEMU control socket. This requires no additional configuration on the host, but may not be optimal for performance. The other routing modes use uinput instead to transport events, which requires additional configuration.

UInput Permissions

To use the virtio-host or input-linux routing modes, screenstub needs access to /dev/uinput and the virtual /dev/input/event* devices. udev rules can be used to set up device permissions. Additional rules may be included for any external devices you want to "grab" and forward to the guest.

Xorg also needs to be configured to ignore the virtual devices. Copy the xorg config into your xorg.conf or /etc/X11/xorg.conf.d/ directory to prevent Xorg from trying to use the virtual input devices for the host.

Host Control

These are pretty straightforward to use when they work, however it is recommended to use the built-in DDC/CI support instead. You will probably need to load the i2c-dev kernel module for it to work, by placing i2c.conf in /etc/modules-load.d/.

NVIDIA

Some NVIDIA Linux drivers have had broken DDC/CI support. There are workarounds but there may be issues when using DDC/CI over DisplayPort from the host.

Guest Control

Many monitors require a DDC/CI command to be issued by the GPU on the currently active input. In this case screenstub must issue a command to the guest OS to instruct it to relinquish control over the screen back to the host. QEMU Guest Agent and SSH are two common methods of executing commands inside of a guest.

Windows

Note that Windows applications interfacing with the screen must run as a logged in graphical user. Services like QEMU Guest Agent or SSHd often run as a system service and may have trouble running these commands without adjustments. NVAPI for example (via ddcset -b nvapi) may be used as an alternative on NVIDIA cards.

QEMU Guest Agent

A recent version of qemu-ga is required to be able to execute processes in the VM. It can be built from from source, or you may download a compiled installer here.

It is recommended that you disable the default qemu-ga system service, and instead schedule it to run on user login. I run the following in a powershell script on startup:

Start-Process "C:\Program Files\Qemu-ga\qemu-ga.exe" -WindowStyle Hidden

This needs to run as admin, so you can use task scheduler for that pointing to a script containing the above:

schtasks /create /sc onlogon /tn qemu-ga /rl highest /tr "powershell C:\path\to\qemu-ga.ps1"

macOS