Skip to content

Latest commit

 

History

History
265 lines (209 loc) · 7.33 KB

09-bootstrapping-kubernetes-workers.md

File metadata and controls

265 lines (209 loc) · 7.33 KB

Bootstrapping the Kubernetes Worker Nodes

In this lab you will bootstrap 2 Kubernetes worker nodes. We already have Docker installed on these nodes.

We will now install the kubernetes components

Prerequisites

The Certificates and Configuration are created on master-1 node and then copied over to workers using scp. Once this is done, the commands are to be run on first worker instance: worker-1. Login to first worker instance using SSH Terminal.

Provisioning Kubelet Client Certificates

Kubernetes uses a special-purpose authorization mode called Node Authorizer, that specifically authorizes API requests made by Kubelets. In order to be authorized by the Node Authorizer, Kubelets must use a credential that identifies them as being in the system:nodes group, with a username of system:node:<nodeName>. In this section you will create a certificate for each Kubernetes worker node that meets the Node Authorizer requirements.

Generate a certificate and private key for one worker node:

On master-1:

cat > openssl-worker-1.cnf <<EOF
[req]
req_extensions = v3_req
distinguished_name = req_distinguished_name
[req_distinguished_name]
[ v3_req ]
basicConstraints = CA:FALSE
keyUsage = nonRepudiation, digitalSignature, keyEncipherment
subjectAltName = @alt_names
[alt_names]
DNS.1 = worker-1
IP.1 = 192.168.5.21
EOF

openssl genrsa -out worker-1.key 2048
openssl req -new -key worker-1.key -subj "/CN=system:node:worker-1/O=system:nodes" -out worker-1.csr -config openssl-worker-1.cnf
openssl x509 -req -in worker-1.csr -CA ca.crt -CAkey ca.key -CAcreateserial  -out worker-1.crt -extensions v3_req -extfile openssl-worker-1.cnf -days 1000

Results:

worker-1.key
worker-1.crt

The kubelet Kubernetes Configuration File

When generating kubeconfig files for Kubelets the client certificate matching the Kubelet's node name must be used. This will ensure Kubelets are properly authorized by the Kubernetes Node Authorizer.

Get the kub-api server load-balancer IP.

LOADBALANCER_ADDRESS=192.168.5.30

Generate a kubeconfig file for the first worker node.

On master-1:

{
  kubectl config set-cluster kubernetes-the-hard-way \
    --certificate-authority=ca.crt \
    --embed-certs=true \
    --server=https://${LOADBALANCER_ADDRESS}:6443 \
    --kubeconfig=worker-1.kubeconfig

  kubectl config set-credentials system:node:worker-1 \
    --client-certificate=worker-1.crt \
    --client-key=worker-1.key \
    --embed-certs=true \
    --kubeconfig=worker-1.kubeconfig

  kubectl config set-context default \
    --cluster=kubernetes-the-hard-way \
    --user=system:node:worker-1 \
    --kubeconfig=worker-1.kubeconfig

  kubectl config use-context default --kubeconfig=worker-1.kubeconfig
}

Results:

worker-1.kubeconfig

Copy certificates, private keys and kubeconfig files to the worker node:

On master-1:

master-1$ scp ca.crt worker-1.crt worker-1.key worker-1.kubeconfig worker-1:~/

Download and Install Worker Binaries

Going forward all activities are to be done on the worker-1 node.

On worker-1:

worker-1$ wget -q --show-progress --https-only --timestamping \
  https://storage.googleapis.com/kubernetes-release/release/v1.13.0/bin/linux/amd64/kubectl \
  https://storage.googleapis.com/kubernetes-release/release/v1.13.0/bin/linux/amd64/kube-proxy \
  https://storage.googleapis.com/kubernetes-release/release/v1.13.0/bin/linux/amd64/kubelet

Reference: https://kubernetes.io/docs/setup/release/#node-binaries

Create the installation directories:

worker-1$ sudo mkdir -p \
  /etc/cni/net.d \
  /opt/cni/bin \
  /var/lib/kubelet \
  /var/lib/kube-proxy \
  /var/lib/kubernetes \
  /var/run/kubernetes

Install the worker binaries:

{
  chmod +x kubectl kube-proxy kubelet
  sudo mv kubectl kube-proxy kubelet /usr/local/bin/
}

Configure the Kubelet

On worker-1:

{
  sudo mv ${HOSTNAME}.key ${HOSTNAME}.crt /var/lib/kubelet/
  sudo mv ${HOSTNAME}.kubeconfig /var/lib/kubelet/kubeconfig
  sudo mv ca.crt /var/lib/kubernetes/
}

Create the kubelet-config.yaml configuration file:

worker-1$ cat <<EOF | sudo tee /var/lib/kubelet/kubelet-config.yaml
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
authentication:
  anonymous:
    enabled: false
  webhook:
    enabled: true
  x509:
    clientCAFile: "/var/lib/kubernetes/ca.crt"
authorization:
  mode: Webhook
clusterDomain: "cluster.local"
clusterDNS:
  - "10.96.0.10"
resolvConf: "/run/systemd/resolve/resolv.conf"
runtimeRequestTimeout: "15m"
EOF

The resolvConf configuration is used to avoid loops when using CoreDNS for service discovery on systems running systemd-resolved.

Create the kubelet.service systemd unit file:

worker-1$ cat <<EOF | sudo tee /etc/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service

[Service]
ExecStart=/usr/local/bin/kubelet \\
  --config=/var/lib/kubelet/kubelet-config.yaml \\
  --image-pull-progress-deadline=2m \\
  --kubeconfig=/var/lib/kubelet/kubeconfig \\
  --tls-cert-file=/var/lib/kubelet/${HOSTNAME}.crt \\
  --tls-private-key-file=/var/lib/kubelet/${HOSTNAME}.key \\
  --network-plugin=cni \\
  --register-node=true \\
  --v=2
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

Configure the Kubernetes Proxy

On worker-1:

worker-1$ sudo mv kube-proxy.kubeconfig /var/lib/kube-proxy/kubeconfig

Create the kube-proxy-config.yaml configuration file:

worker-1$ cat <<EOF | sudo tee /var/lib/kube-proxy/kube-proxy-config.yaml
kind: KubeProxyConfiguration
apiVersion: kubeproxy.config.k8s.io/v1alpha1
clientConnection:
  kubeconfig: "/var/lib/kube-proxy/kubeconfig"
mode: "iptables"
clusterCIDR: "192.168.5.0/24"
EOF

Create the kube-proxy.service systemd unit file:

worker-1$ cat <<EOF | sudo tee /etc/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Kube Proxy
Documentation=https://github.com/kubernetes/kubernetes

[Service]
ExecStart=/usr/local/bin/kube-proxy \\
  --config=/var/lib/kube-proxy/kube-proxy-config.yaml
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

Start the Worker Services

On worker-1:

{
  sudo systemctl daemon-reload
  sudo systemctl enable kubelet kube-proxy
  sudo systemctl start kubelet kube-proxy
}

Remember to run the above commands on worker node: worker-1

Verification

On master-1:

List the registered Kubernetes nodes from the master node:

master-1$ kubectl get nodes --kubeconfig admin.kubeconfig

output

NAME       STATUS     ROLES    AGE   VERSION
worker-1   NotReady   <none>   93s   v1.13.0

Note: It is OK for the worker node to be in a NotReady state. That is because we haven't configured Networking yet.

Optional: At this point you may run the certificate verification script to make sure all certificates are configured correctly. Follow the instructions here

Next: TLS Bootstrapping Kubernetes Workers